Abraham Conclusion Essay Example for Free

Abraham Conclusion Essay While writing the whole play for my group, and doing research, I learned a lot of things about Abraham. God helped Abraham a lot, first with the blessing, then Lot, and even for the birth of Isaac. Most of the time when something bad happens, Abraham doubted God. God never zapped him, or kill him, He was patient. At the end, Abraham could not help Isaac find a wife himself for he is weak and old, he trusted that God will help him like the way God helped him before. I think faith means to trust God completely, 100%. True faith is shown, when you yourself could not help anymore, only God could. And you trust unto Him a very hard job, being sure that He will be able to do it. See more: Beowulf essay essay This happened when Abraham was too old to go look for a wife for Isaac, he had faith that God will find one for him, and God did. What I learned about God while reading about Abraham is that God is very patient. Every time Abraham questions or doubts him, he doesn’t get angry. I also learned that God is faithful and true to his word. Every single promise God made came true, though not the way some people expected it. Last of all, I learned that God is omniscience. Though Sarah is very old and beyond the age of child bearing, God was able to make her have her son, the son that was the one to take the true blessing, Isaac.

The Yellow Wallpaper by Charlotte Perkins Gilman -- Charlotte Perkins

The Yellow Wallpaper by Charlotte Perkins Gilman Charlotte Perkins Gilman's, "The Yellow Wallpaper" is a partial autobiography. It was written shortly after the author suffered a nervous breakdown. This story was written to help save people from being driven crazy. Appropriately, this short story is about a mentally disturbed woman and her husband's attempts to help her get well. He does so by convincing her that solitude and constant bed rest is the best way to cure her problem. She is not allowed to write or do anything that would require thinking. The woman is restricted to a room where she slowly begins to go insane. Atrocious yellow wallpaper covers this room and it aids in her insanity. The woman is writing the story to express her insane thoughts against her husband's will. "The Yellow Wallpaper" begins with the narrator talking about her illness. She informs the reader that her husband, John, is a physician and he believes she is not even sick. This may lead the reader to believe that she really is not sick also. She even says herself "I am glad my case is not serious!" It is revealed soon that she is writing this story to us, the readers, in secret. She feels comfortable writing on the paper and it relieves her. In the story she says, "I would not say it to a living soul, of course, but this is dead paper and a great relief to my mind." This gives the reader and the narrator a very strong connection. For the reader is the only one to know her deepest thoughts. Throughout the entire story, John controls his wife in a loving but dominant way. According to him, he knows what is best for her. There is even a time where ... ...pressing herself and her story of insanity. "The Yellow Wallpaper" presents readers with story of a woman's insanity. It tells how women were disregarded at times and treated like frail children at others. Ultimately, Jane realized that she held control over her own life. It was her responsibility to relieve her stress and tell her story. This is a story of seclusion and escape. "The Yellow Wallpaper," being highly autobiographical for Charlotte Perkins Gilman, was written shortly after her own nervous breakdown. The story is part reality for her and part fiction focusing on the treatment that Dr. S. Weir Mitchell enforced upon her which was rest, seclusion, and absolutely no writing, which is what she loved the most. Her story is a stepping-stone in helping to understand depression, liberating women, and expression.

Challenges Faced by the Steel Industry

Challenges faced by the steel industry Introduction3 Challenges faced by the steel industry3 Conclusion13 Work cited During the 1950s,the European steel market, steel production and import unrelentingly augmented. This created surplus provisions on the promotion of the Six. Due to this, there was deterioration of the market together with its selling value. This drop continued as a result of antagonism from inexpensive introductions from eastern nations. Therefore, the European steel industry was actually positioned at a drawback for the reason that its cost prices were higher than those of its contestants (Steel Industry and the Environment p. 1). Consequently, there was a proposal from the High Authority that there should be limitations in the import steel from third countries and also increase in the convention tariff by a certain percentage. This proposal brought concern to the European administration and industry, which feared that their operating associates would take castigatory procedures. In the year 1963, the High power, during the reign of the Italian President Dino Del Bo, there was a proposal of the ordinary viable guiding principle. On the other hand, the administrations differed on the concern that, the level of fortification was only afforded for by the ordinary exterior tariff (Steel Industry and the Environment p. 1). Therefore, the High power made use of its authorities in order for there to be adoption of a number of proposals which included, the mandatory where there was concern of there aspirations. Though there was a suggestion of an option in regard to the means of achieving the aims. This offered an invitation to the administrations in order for there to be a set up of tangential fortification at a level which is at a minimum height of 9 %. This was, at an instance where there was a requirement by Italy. This was later followed by the French Government criticism that the alternative had been made to the supranational technique, though this was the only available alternative despite the divergence amid the administrations. In the end, there was a challenge by the role of the High Authority, by numerous administrations, which turned to be a question once again (The European Steel Industry p. 6). The encouraging substance outcome attained during 2004 by the steel mills are still being working out their optimistic impact on the in general movement of this commerce throughout the first half of 2005. There has been a great cover on the stipulation for the steel inventions on the entire manufacture of the first section regardless of the increase in the quantity of mills. Therefore, there has been augmentation in their production, which in turn will offer response to the promotion necessities that have confirmed a stipulation in the expansion, even though this has emerged lethargic in some areas and burly in others (The European Steel Industry p. 6). The Arab area was possibly among those main sections, which have observed an augment in manufacture of, and also stipulation for the steel products throughout the first quarter of this year. In most it has been made known that the construction statistics of the most prolific nations in the Arab region have exposed an augment in the production expansion speed of extended and level manufactures. According to the predictions of the International Iron and Steel Institute (IISI) the global stipulation for the steel creations there was an observed growth of 3. 7% throughout the year of 2005. Therefore, there is an expected increase in the demand by the IISI that the stipulation will surpass one billion tons for the first time that is up by 36 million tons in comparison to 2004 (Challenges and Opportunities of Steel industry . . 1). According to Areclor, which is the largest steel manufacturer globally, there has been a contradiction in the views expressed by number of companies in the decision making in the reduction of their own production due to the slowdown in the demand and also in the maintenance of the supply or stipulation demand. All this is in spite of the growth of t he statistics, which point out to the augmentation in stipulation and an increase in the production in a number of regions in the globe (â€Å"Analysis of economic indicators of the EU metals industry p. 1). This has led to the declaration that there will be reduction in the manufacture of even formations by a number of tons in the first half of that year due to the low stipulation in the promotion of the European Union. Although, this decrease unreservedly aspires at offering support to the advertising costs that the company has already publicized. This has clinched an augmentation of Euro 15/ton effectual early in the second quarter. The second largest steel producer, â€Å"Mittal Steel†, provided some analysis that opted to taking comparable applications to that of Arcelor (â€Å"Analysis of economic indicators of the EU metals industry p. ) This offered assistance in the reduction of the creations within the perception of the requirement of upholding the provisions and stipulation stability of sustaining the values at the cost of measure. Therefore, that is what the steel industries have been determined to attain in 2005, particularly after the augmentations that took place i n the prices of the raw substance. Particularly, the iron ore industry, which had indentures concluded in the year 2005 with an augment of up to 71. 5% over the stage of preceding year. There may be an illustration to a new path for this steel manufacturing during this year (The European Steel Industry p. 6). Therefore, this tendency of the modifications observed by the global steel markets, which are determined in the light of the promotion actions and through the proposals which were being taken by the main corporations. This controlled the majority of the steel production internationally, which may depict a new path for this production during that year. This track was set as a foundation on viewpoint punctuality from, sustaining value at the cost of measure. Therefore, this may somehow or one more, signify that the steel cost will keep on going in the same drift observed by the steel creations during 2004 in addition to the first quarter of 2005, to be precise, the increasing tendency of prices. Therefore, this may lead to the increase on the complexities facing the steel customers in a number of the main overwhelming segments at the front of which are the sectors of building, manufacturing productions and cylinders and conduit manufacturing (The European Steel Industry p. ). The Arab steel manufacturing saw an apparent enlargement throughout the year 2004 and early 2005. Therefore, this development is symbolized in escalating the manufacture, which had a powerful justification in entering into indenture on the measure manufactured throughout the first quarter and measures of some fractions of that year. There must be a stimulation of the necessity of making as a severe review of the situation of the markets as to take into deliberation of the well-matched provisions and stipulations. This is all in order to shun any saturation under the force of the requirements of manufacturers for there to be an augmentation in the production which may result in a turn down in cost and materialization of the price antagonism in the promotions. Despite, there was a hold back, which commenced to come into continuation for a number of steel creations in a number of promotions (The European Steel Industry p. 8). The monetary recuperation experienced by most Arab promotions because of the high gas and oil costs comprised an encouragement to the surroundings for the affluence of the preponderance of the other different divisions. This led to the prevention of the quick appearance of the holding back circumstances of stipulation in some intense segments. Nevertheless, this delay came into continuation when the steel overwhelming segments became powerless in the take up of the sustained augment in the cost of the produces, which may enlarge into a higher enlargement in the prospect (The European Steel Industry p. 8). The increase observed in the steel costs, which were further than many prospects, stand in itself occasions and confronts. These occasions were to be made use of, hence requiring that the confrontations should have been examined that the steel manufacturers will be required to maintain the explosion, which it has observed. This detonation was given a productive suggestion in the enhanced circumstances of the steel industries, which have also offered contribution to inspiration of the expansion procedures of the steel manufacturing. This is only achieved by having reflections of coming up with a number of many innovative developments (The European Steel Industry p. 6. ). Privatization of the European steel manufacturing has made a significant move in the direction of a more competent manufacturing organization. The major confrontation of the industry is the post-privatization and is required to convene the prospect of the industry’s innovative stakeholders. This is in different to the administrations, classified shareholders who in turn have different or even more monetarily familiarized objectives. Those industries that are possessed by the state have more focus on the maintenance of the production volume in order to secure jobs rather than on their end product presentation. Differently in the case of the private shareholder, there is more focus on the average return, which implies that there is a look into the enjoyment of the price of the share together with its bonuses. This takes place over a given period of time in order for they’re to be an evaluation of the presentation of the reserves of the steel markets (Directorate Science, Technology And Industry p. 2). . More and more, the European steel market is required to have an international competition with other different segments in the steel industry for capital to investment prospects. Therefore, the steel industry is required to show and at the same time demonstrate the worth formation possible of their approaches to the worldwide monetary society. Increase in the concealed possession and commercial awareness has offered assiststance to the steel corporations to function outside countrywide limitations and optimize their possessions organizations in the European background, focusing construction mainly in superior worth creations that are added. Over a number of years, the European steel makers have combined productions, exchanged possessions, cooperative undertaking, easing unity of the European steel industry (Metal Bulletin Research p. 1). In the opening new Challenges in the industry, if continued at present circumstances, the company’s improvement is likely to put additional damage on the energy, carbon dioxide and on our ecological trail in universally and also the raw material possessions. Other challenges that come about in this steel industry will be due to the high anticipation on the increase of energy stipulation. Therefore, the demand in energy will add to with about 60 % amid 2002 and 2030. In excess of 66% of the augment in global power stipulation amid 2002 and 2030 is likely to originate from those nations that are on the rise. Such countries are particularly in Asia. Also China counts for over 20% of the entire augment (Metal Bulletin Research p. 1). In the enhancement of the carbon dioxide confrontation, there is a likeliness of ArcelorMittal decreased carbon dioxide emanations by over 20% since 1990, through scientific expansion and reservations. Therefore this consequence surpasses the European Kyoto target by about two and half times. Although there is still much further development to comprehend as steel creation in countries, for instance like the CIS or China has a much higher carbon dioxide emanation speed, up to two times the heights which are allowed in, North America and Western Europe (The European Steel Industry 2001 p. 6. ). Despite all the challenges, there is no jeopardy of shortage, although a number of features are likely to lead to a good deal of lower quality resources. There are also, steel corporations that offer protection to their enduring supplies through upright incorporation. Since 1999, there has been an increase in the stipulation in the world steel steadily. Nevertheless, this augmentation has been in acceleration since 2002 and has symbolized up to around 50 million tones additional yearly. In 2003, there was an increase in the world steel expenditure increased by about 6. 6% measuring up to 2002, and additional enhancement by 6% in 2004 and 5% in 2005 were in expectation (Directorate Science, Technology And Industry p. 2). This strong rush in the consumption of steel is as a consequence of the spectacular acceleration of familial steel in terms of its stipulations in China where there has been an average of 2. 6% yearly steel consumption that had been increasing by over the time 1995 to 2000. This augmentation has been by some 25% yearly ever since 2001 and there is an anticipated growth which is likely to take place at a rate which is a very fast pace also in both 2004 and 2005. In comparison to this, there was a decline in the consumption of steel in the rest of the world by 4. 2% in 2001 and since then there has been an annual rate of 2. % (Directorate Science, Technology And Industry p. 2). There was a turn down in the steel expenditure OECD region by 0. 5% in 2003, which was a total difference to the year 2002. This therefore, gave an indication of an 8. 9% reduction in North America that counterbalanced a 2. 6% add to in Europe and a 4. 5% augmentation in the Asian-Pacific region. Due to the bett er economic conditions in the region during 2004, the steel expenses in the OECD were anticipated to rise by nearly 3%, with the North American as the promotion grasped most of the augmentation (+5. 7%) and more reasonable increase in Europe (+2. %) and Asia (+1. 3%). Therefore, the tendency was anticipated to persist also in 2005 (Directorate Science, Technology And Industry p. 2). Other many challenges that are facing the steel industry, include, the increase in the considerable steel prices that has led to more generation of profit in the industry of steel. However this has also led to the reduction in the limitations due to the spectacular add to in prices of raw materials and shipment. There are also some jeopardizes of the scarcity for scrap and coke that help in the process of manufacturing steel. Therefore, the important enlargement in prices of most steel creations at the commencement of 2004 created troubles for many industries that were consumed steel (The European Steel Industry 2001 p. 3. ) There was an expectation that, as the cost of the raw materials begged off within that year, there was anticipation that the cost of steel was likely to stay put at comparatively high heights for the rest of that year. In common with the augmentation in the cost of the raw material, there was a dramatic increase in the transportation costs. Also there was an increase in the contract charges for huge vessels which augmented fourfold in a single years, as of 17 000 $/day in January 2003 to 68 000 $/day in early 2004. However afterwards, the rates of shipment began to decline and were likely continue with the decline taking into consideration the limitations on loaning that was introduced by the Chinese administration in order to deliberate the expansion (Directorate Science, Technology And Industry p. 2). In the current years, the opening between aptitude and manufacture condensed. This lessening in the past few years was mainly significant in the OECD region, where steel-manufacturing aptitude had confirmed a net decrease of about 41. 5 million tones, or 6. 7%; a further net reduction of some 15 million tones which was anticipated by 2005. In the NIS, most of the outdated unproductive surplus aptitude has been blocked. Though, with the increase in the familial stipulation and a high level of exports, a number of innovative capacities are anticipated to come on stream in the near prospect. Also pressure and complexities in raw substance markets lasted up to the end of 2005, by which time alterations that were expected by contractors assist in the easing of the complexities (Directorate Science, Technology And Industry p. 2). There are also a number of challenges that are faced by the steel industry. They include, the steel market is experiencing a holding back in the stipulation. This is happening in both the restricted and worldwide face. Therefore, due to this, there are a number of smaller producers who are really far prolonged with arrears, and are taking damage. At that height of the promotion, there are clear indications of the effects of the deceleration. There are a number of key reasons that are accountable for the turn down of the stipulation in the steel industry. The initial cause is the rate of interest indecision that has put anxiety on the customer expenditure, in general. There is also a condensed customer expense that has affected all industries to some level (Woodley, et al p. 6). As there is reduction in the expenditure of the customers in the chain value, there is a reduction in the volumes and profits of the retailers and, in turn, the contractors and manufacturers. This clearly indicates that once there is talk in the reduction of the interest rate, there is a likeliness of the opinions of people turning positive hence leading to more expenditure from the customers. The other reason that has led to the economic deceleration is the international sub prime, which commenced in the US and has been making effect throughout the monetary markets globally. Therefore, there is anticipation since the nation is still waiting to see if it will get affected. Therefore, the impact of the US hold back is likely to be insightful and it is important for the world to work through it and the extremes of the precedent (Woodley, et al p. 6). Conclusion The steel industry has had a number of challenges that have had a great impact in the sector hence lowering its income. They include, the steel market experiencing a holding back in the stipulation. This is happening in both the restricted and worldwide face. Therefore, from the observation, there is a clear indication that the steel industry had had it all in terms of its economy, demand and supply. There is a likeliness of the company observing an augmentation in its stipulation for all cold-rolled, thin measure stainless steel. This is because the cookery facilities are generally among the last things to be improved prior to any event like that (Woodley, et al p. 8). Therefore, in spite of the recession experienced in universally, there is likeliness that there has been fragmentation in the stainless steel market, as the tank-tainer promotion explodes in harsh contrast with the rest of the industry. This kind of trend is not rare in the stainless steel industry in addition to the carbon steel industry. This is because the possessions have got an extensive variety of submissions together with their duration of use on many potentially contradictory markets. Therefore, there is a possibility of a number of divisions in the promotion showing an improvement while others indicate a recession. Therefore, this is not a bad thing in the industry of steel though the most important thing is for the steel market to be prepared for the challenges Woodley, et al p. 6) Work cited â€Å"Analysis of economic indicators of the EU metals industry: the impact of raw materials and energy supply on competitiveness. † European Commission, 2006 â€Å"Challenges and Opportunities of Steel industry† 2005. 31March 209 http://www. arabsteel. info/total/long_editor_last_e. asp? ID=18 Dirctorate Science, Technology And Industry. â€Å"Recent Steel Market Developments† 2004. 31March 2009 http://www. oecd. org/dataoecd/34/48/32366875. pdf. Metal Bulletin Research, Steelmaking Raw Materials Monthly Issue 146, July 2008 â€Å"Steel Industry and the Environment, Technical and Management Issues. † IISI and UNEP Technical Report No. 38. 1997. The European Steel Industry: â€Å"Restructuring in an Era of Globalization† 2001. http://www. hatch. ca/consulting/knowledge_base/Articles/THE%20EUROPEAN%20STEEL%20INDUSTRY%20RESTRUCTURING. pdf. Woodley, David & Wilkes, Alan. â€Å"European Stainless Steel Industry Faces Fundamental Restructuring† 1998. 31March 2009 http://www. hatch. ca/Consulting/Knowledge_Base/Articles/European%20Stainless%20Steel. pdf

Problem Based Learning

BASIC TEACHING & LEARNING COURSE (KAP CENTRAL ZONE/2013) 19 – 23 FEBRUARY 2013 ASSIGNMENT ONE (1) NAME| NUR AZIEMAH MOHD AZMAN| ID. STAFF| 302753| FACULTY| COMMUNICATION AND MEDIA STUDIES| CAMPUS/ COLLEGE| SHAH ALAM| QUESTION NO. | 2| FOR iLQAM USE ONLY FOR iLQAM USE ONLY DATE RECEIVED: TOTAL MARKS: STAMP: DATE RECEIVED: TOTAL MARKS: STAMP: NUR AZIEMAH MOHD AZMAN BASIC TEACHING & LEARNING COURSE 19 – 23 FEBRUARY 2013 (CENTRAL ZONE) UNIVERSITI TEKNOLOGI MARA (UiTM) ASSIGNMENT 1 – QUESTION 2â€Å"Learning is not a spectator sport.Students do not learn much just sitting in classes listening to teachers, memorizing pre-packaged assignments, and spitting out answers. They must talk about what they are learning, write about it, relate it to past experiences, and apply it to their daily lives. They must make what they learn part of themselves. † Explain how you will conceptualise this principle in your classroom? | There is a saying that goes: â€Å"Give a man a fish; you’ll feed him for a day. Teach a man how to fish; you’ll feed him for a lifetime. † As an educator, I hold on firmly to saying above.When I first started teaching, I told myself that I can either be a teacher who is only concerned about what need to be taught or I can be a teacher who is concerned about what and how something is supposed to be taught. I chose the latter. Why? Students had spent more than 12 years of learning in schools where most of the time, they sit and listen to what the teacher is teaching. Little or less participation on their behalf is incorporated during those 12 years. The main objective is to pass 3 ‘big and important’ examinations in 12 years.Sad to say, they soon forget a big chunk of what they had been learning for the past 12 years immediately after they finish their last paper for SPM. This is because students are only made to remember what they are taught; not to retain them. You can remember information for a specific length of time before you forget about it; but if you can retain that information, you’ll remember it forever. Let’s take mathematic as an example. We were taught how to do simple calculations such as addition since we were 6 years old. We not only learn how to add numbers in class, we also use it in our daily lives too.In a much simple terms, we practice what we learn in school and incorporate it into our daily lives. We retain the skills to do additions by doing and practicing. What about additional mathematics? Frankly speaking, if I was given a set of additional mathematics questions today, I would not be able to solve even the simplest question. Why? Because I did not use any of the formulas I was taught in school in my daily lives. I did not retain the information. Students are unique. They might not have the same way of learning.Lecturers and educators must be aware of their student’s ability in order to make the teaching and learning process a success. â€Å"Students have different levels of motivation, different attitudes about teaching and learning, and different responses to specific classroom environments and instructional practices. † (Brent and Felder, 2005) That is why, students learn best when they are incorporated and is actively involved during the learning process. The traditional method of teaching is more concerned on what the student should learn rather than how the student should be learning.In my class, I use Problem Based Learning (PBL) method. PBL is a new method of learning where there is a balance between what the students should learn and how they should be learning. â€Å"This new approach to learning is bringing about new ways in which students are involved in the learning process. Teachers know that students do not learn at their highest potential when they are in a classroom where the teacher stands at the front of the room and gives them knowledge. † (Utecht, 2003) During class, I e ncourage my students to speak and share information that they have on the topic.Before I start my lecture, I would first brainstorm the idea of the topic with my students. Initially, students would be reluctant to participate because they are afraid of saying the wrong answer. I encourage them saying that â€Å"if it is an opinion, there is no right or wrong answer†. Students in universities are andragogy learners; they are adult learners. As an adult, they would like to have more control of their own learning. â€Å"Andragogy reorients adult educators from educating people to helping them learn.The methods used may range from isolated instruction within a curriculum or integrated instruction. It may also encompass intentional and unintentional learning situations. † (Crawford, 2004) This type of students would be more interested to learn if they are given more power and control in the learning process. There are six assumptions on andragogy learners: 1. Adults need to know the reason for learning something (Need to Know) 2. Experience  (including  error) provides the basis for learning activities (Foundation). 3.Adults need to be responsible for their decisions on education; involvement in the  planning  and  evaluation  of their instruction (Self-concept). 4. Adults are most interested in learning subjects having immediate  relevance  to their work and/or personal lives (Readiness). 5. Adult learning is  problem-centred rather than content-oriented (Orientation). 6. Adults respond better to internal versus external motivators (Motivation). (Malcom Knowles, 1977) I planned and carry out my teaching and learning process using the 6 assumptions as my main guidance.Most of the time during class, I allow my students to voice out their opinion and share what they have to say on certain topics. I also let them know the objective of the learning and what they will acquire at the end of the class. If they feel that they did not achieve what they should at the end of the lesson, I encourage them to share their problems with their classmates so that they can come up with the solutions together. During my lecturer, I use simple examples which they can easily connect with in their daily lives. I usually share my experience and ask them to share theirs with the class.It takes the seriousness out of the learning process and students felt more comfortable sharing their problems and experience. For me, a relaxed and simple learning environment will encourage the students to be more active and not be reluctant to join in the discussions. A rigid classroom will make the students as cold as ice. Before I started teaching, I told myself to be the teacher that u have never had; the teacher I want to have but did not. I want my students to them around me and to not be ashamed to tell what they have in mind, because I believe the most valuable knowledge is the knowledge that we shared.References Brent. R, & Felder M. R. (2005). Understanding students’ differences. Journal of Engineering Education, 94(1), 57-72 Crawford S. R (2004). Andragogy – Malcolm Knowles. Retrieved March 21 from http://academic. regis. edu/ed205/Knowles. pdf Knowles, M. S. (1973). The Adult Learner: A Neglected Species. Houston:  Gulf Publishing Company. Utecht R. J. (2003). Problem Based Learning in Student Centred Classroom. Retrieved March 21 from http://www. jeffutecht. com/docs/PBL. pdf

buy custom The Use of the Drug essay

buy custom The Use of the Drug essay The abuse of steroids is also associated with the affecting the mind of the user in a manner that is profound. This is exhibited in the cause of the temporary changes in the personality with most of the users. There may be a case of aggression that is uncontrollable in addition to a behavior that is violent that is termed as roid age this is also accompanied to the severe swings of the moods of the victim. The maniac episodes as well as depression. In addition to these effects, the victim may be a sufferer of paranoid jealousy. Delusions, impaired judgments associated with invincibility feelings as well as extreme cases of irritability. At the time of refraining from the use of the drug, the users who have reached a chronic stage may exhibit some symptoms of withdrawal that are responsible for the intensification of the psychological effects (Sherwood, 2008). Although the users may experience an increase in the bulk of the muscles, strength as well as endurance, there is no possibility for the increase of agility as a result of the use of steroids. This also applies to the skills in athletics in addition to the cardiovascular capacity which are the factors that contribute to the enhancement of performance. There is likewise on evidence that conclusively upraises the decrease in the time of recovery as a result of the use of steroids. Some of the research has identified that the abuse of the drug is responsible for hampering the usual process that is associated with the healing of the wound (Sherwood, 2008). Considering the facts that have been highlighted, it is evident that there is an additional need for research in an effort of enhancing the solutions that have so far been identified although they are still associated with a significant magnitude of validity. Due to the side effects of the use of the drug and the possibility of the attraction of the use to the use of the drug as a result of the peer pressure there is an emergency to be acted upon. Buy custom The Use of the Drug essay

Start Writing that Essay and See It to Completion!

Start Writing that Essay and See It to Completion! Start Writing that Essay and See It to Completion! Writing skills are a necessity in school and most people’s everyday life. If you worry about writing, have a tendency to procrastinate, or are fearful about the assignment, here are some tips to help you start writing a strong essay and finish it by deadline. #1 Set a STRICT final deadline. Deadlines are important because they compel a writer to get the work in small chunks, within a manageable time frame. If you find that you have difficulty holding yourself accountable, set computer calendar reminders and ask a friend, parent, or someone else to remind you of your goals. Set extra reminders as the final due date approaches. #2 Set a daily quota. This will help you reach your deadline and (as mentioned in item #1) break the writing task into easier, more manageable tasks. #3 Write every day. Writing every day will help you develop the habit of thinking I get to write today, instead of â€Å"I have to write today.† (And, if that mental shift doesn’t happen, at least it will be a routine that compels you to get the job done.) #4 Shut off electronic devices and find a place to write comfortably. Rid yourself of all distractions which and become more focused on writing an essay that will catches the readers attention. #5 Visualize the finished piece. Be specific in your thought process and visualize exactly what your perfect essay can (and will) look like. Have your essays proofread by someone qualified to give appropriate feedback and edits. Our team of writing professionals at are ready to assist you. Talk to us at 1-800-573-0840.

Open Door Policy US & China, Roosevelt Era Research Paper

Open Door Policy US & China, Roosevelt Era - Research Paper Example To add to this, after the Russians were replaced by the Japanese at the end of the Russo-Japanese War in 1905, the United States heavily demanded the concordance to the principles of the Open Door Policy upon Manchuria (Sugita, 3-20). The Open Door Policy had gone through a plentiful that explains many about the imposition of the American policy of free trade and open market towards the strong economies in Asia. However, this also reveals some problems that the policy’s principles and ideological stand had encountered during its time in China. Hence, this paper will argue that the Open Door Policy during Theodore Roosevelt’s regime had encountered conflicting disputes upon its implementation in China. It will first explain a brief background to the Open Door Policy’s birth. It will then narrate the developments that led to the fortification of the Open Door Policy before and during Roosevelt’s era. In relation to this, it will discuss the problems that the policy had encountered during its imposition upon the Chinese economy. ... Their conquest of the Western Frontier urged them to expand their power towards the Eastern Frontier. The United States based their eastern expansion in the desire to bring education and religion to the greater Pacific. More importantly, the purpose of commerce was the primary mover of the expansionist theory. With trade in the minds of these expansionists, the Americans saw China as its potential â€Å"partner† in the Eastern Frontier (Israel, 7-9). James W. Bashford, a Chinese historian, stated that, â€Å"the Chinese themselves, in breaking away from an ancient civilization can readily be led to accept a western, Christian, Protestant civilization.† (Israel, 9). At this stage in history, the Americans saw the potential contained within the huge realm of the Chinese. It can be implied that the superior nature of the United States government had already recognized the advanced Chinese civilization. Hence, the justification for an expansion in the Eastern Frontier can b e seen through the nation’s decisions. In this way, the Open Door Policy was a concrete manifestation of what the American wanted for their eastern conquest. An important catalyst to the implementation of the Open Door Policy in China can also be evidenced in one of the United States’ most useful expansionist doctrines at that time – the theory of Mahanism. Mahanism, formulated by Alfred Mahan, decreed that the might of a nation can be seen through its power in naval forces. With relations to the eastern expansionist desires of the United States, its government was aimed at the procedure of a gunboat diplomacy where China would be submitted under the might of America’s sea power (Israel,